Computer EMF Protection Strips



2 computer strips per unit ordered.  Only 1 strip is needed per device.  These strips can be used on all desktop and laptop computers, tablets, modems, routers, smart meters and other similar technology.


Our Computer EMF Protection Strips filter the harmful portion of the RF (radio frequency) signaling from towers and millimeter-wave antennas, while not affecting the transmission of your information at all.

Because our technology does not block EMFs, all devices continue to operate at their highest and most optimal capacity.  Our over 300 frequencies in our holograms enter our physiology to create a balanced and harmonious solution and protective response to EMFs.

Please click here for more information regarding the science behind how our products protect and support you.


Our computer strips will never need to be replaced as long as they are kept in their highest integrity.  The best way to protect them is to ensure that they do not get scratched, bent nor immersed in water.  Our protective layer helps support this process.

They can be transferred to a new device and if light and gentle heat is applied, they will peel up and off effortlessly to transfer them.  If you use a case over your device, then the case goes over the top and the harmonics and frequencies will penetrate through it.  The case will also help protect your computer strip from everyday wear and tear.  With loving care, your computer EMF protection strips will stay with you for your lifetime.

Radius of Support

Our golden hologram computer strip will support you for up to 6 ft. (1.83 m.) from placement of your strip.


Ideal placement of our computer strips is in a way that they are facing you for not all, yet for most devices.

On a desktop and laptop computer, please place a strip either above or below the monitor on the plastic casing that surrounds the screen.  If this is not possible, then the next best placement is on the keyboard in a way that it faces up at you as you type.

For tablets, if there is a similar design around the screen, then please place the strip in the same way as the computers.  If this is not possible, then please place the strip on the back where the hand holds the device, which tends to also be where the battery is located.

Please place a strip on a modem or router in a way that it faces you when you sit near it or walk past it.

For smart meters and other similar outdoor technology, please place a thin piece of transparent tape over it to ensure that harsh weather does not cause any damage to the strip.  The best placement is in a way that it faces outwards and does not cover anything important.

Our technology has been used for over a decade to support and protect its users and we at EMF Harmonized are grateful to present you with this technology that we too greatly appreciate and love.

In stock

The Need for Protection: EMF Radiation and the Human Body

Dr. Martin Blank was a chemist, an expert in colloid science and electromagnetic radiation science  and has shown how DNA (including the mis-labeled “junk DNA”) acts as a fractal antenna within electromagnetic fields.

  • Damage DNA
  • Cause psychological and psychiatric issues
  • Cause headaches, fatigue, brain fog, and inflammation
  • Dramatically slow a cell’s ability to carry oxygen throughout the body
  • Slow down metabolism

The Issues

Cell phone towers signal your phone through EMF transmissions in order to relay both inbound and outbound phone calls, text messages, and data.


EMFs have been proven to heat up human DNA to damaging levels. Without protection, this can lead to a host of health challenges.

Kid’s Brain

Kids’ brains are known to be hypersensitive to electromagnetic radiation, making it critically important that your kids are protected from all of their devices.


WiFi and smart phones are dramatically increasing the amount of radiation our bodies absorb every day. How are you protecting yourself?

Protective Surface Layer

Protective surface layer made of durable and resilient clear resin to shield the device from external damage.

Infrared Absorbing Layer

Infrared absorbing layer consuming the thermal emission given off by the microprocessor.

Self-Adhering Layer

Single-use self-adhering layer designed to keep the device firmly secured to any smooth surface.

Support Immune Health

Beneficial frequencies support immune health, limit the roping of your blood, and restore healthy blood flow in the body.





Electromagnetic Fields (EMF) of Cellular Towers

Cell Phone Towers

Cell phone towers signal your phone through RF/EMF transmissions in order to relay both inbound and outbound phone calls and text messages.

Computer Receives

When your computer receives these signals, the RM/EMF transmissions are absorbed through the wrist, allowing the harmful signals to enter the blood stream.

Blood Stream

Once they have entered the blood stream, RF/EMF transmissions change your negative (-) blood charge to a positive (+) charge. This leads to roping of the blood and loss the oxygen.

EMF Harmonized Protection Products Neutralize the Harmful Effects of EMF Radiation

Cell Phone Towers

Cell phone towers signal your phone through RF/EMF transmissions in order to relay both inbound and outbound phone calls and text messages.

Computer Receives These Signals

The holographic filter on the EMF Protection Discs rebalance the harmful frequencies, converting them to beneficial frequencies.

Entered The Blood Stream

Beneficial frequencies support immune health, limit the roping of your blood, and restore healthy blood flow in the body.

Grant Johnson

The BEST and highest quality products!​

"Amazing technology I never knew was available! After using the computer strips for some time now, I notice that I have less stress and a better feeling of centeredness since we’re on our computer so often. Definitely would recommend it!"

“Unique and different from all other EMF protection products”

Louie Psihoyos

Absolutely amazing and life changing!

"The computer emf protection strip works. I can feel a difference in my performance at the computer and feel less agitation and strain overall. Definitely recommend this!"

Additional information

Weight .05 kg

1. How many strips are in each unit ordered?
There are two strips per unit ordered. You need one strip per device. If you have more than two devices, then you will need to order more units as there are two strips per unit.

2. Where do I place my computer EMF Protection Strips?
The most ideal location is on the device itself in a way that they are facing you and near your body while you use a device. Place them in an area that will stay clean and will not get physically damaged. If the device has a case, remove it before applying the strip. Please do not place them on you. They will need to be placed on a clean, dry and flat surface for the strips to properly adhere to the surface area. Please apply to devices that communicate with Wi-Fi routers and cell towers.

3. Can I transfer my computer strips from one device to another?
Yes. You can transfer them. Please keep in mind that once the adhesive bond is broken that it may have less adhesive to stick to your next device.

4. Can I use the computer strips on other devices?
Yes. You can place these on devices that receive Wi-Fi signals or are in communication with towers.

5. If the strips get wet, will they still work?
Yes. However, the life of the product may become shorter, and the edges of the computer strips may begin to curl on the edges. Therefore, it is best to keep them on a dry, clean surface away from dirt, body oil and sweat. There is no need to clean them and keeping them dry is ideal.

6. Should I place a computer strip on my headphones or Apple watch?
Our computer strips provide signaling to the body to stay at rest from EMFs. Apple watches and Bluetooth devices have low emissions, and the strips will provide coverage but often do not stay well adhered due to sweat, oils and other exposure.

Thus, it is always best to place your cell phone disc and your computer strips on their appropriate devices and they will support and protect you within 6 ft, 1.83 m.

7. What is the difference between the Computer EMF Protection Strips and the Cell Phone EMF Protection Discs?
The Cell Phone EMF Protection Discs are for the phone and are larger for close body exposure. The Computer EMF Protection Strips are for the devices at home receiving data.

8. How Our Scalar Wave Holographic Technology Works Some people ask, “how is a holographic disc supposed to help protect from EMFs?”
Good question.
Our golden holograms are a Mylar material programmed with frequencies that are known to be beneficial to human biology and physiology. These frequencies are derived from the natural compounds’ molecular structure and are then programmed into the Mylar hologram, which is a substance and device used in international space programs.

The substrate can hold the over 300 frequencies added to the disc (like a magnet and a credit card strip). The hologram acts to seal the disc and frequencies and acts as a prism for signaling the body. The result is that the body elicits a physiological counter-effect to EMFs.

In other words, an EMF elicits an effect of causing the loss of red blood cells to carry oxygen. The frequencies programmed into our Mylar hologram signal information transfer to our DNA, which then sparks a physiological switch to ensure that red blood cells retain their negative electrical charge (which is a good thing). With red blood cells retaining their negative electrical charge, red blood cells are able to carry oxygen.

As we know, oxygen is life.

You can read more about the deep science of scalar waves and our technology used in the study by opening this link here or finding it on The Science page.

9. What frequencies were used to make the Computer EMF Protection Strips?
There are over 300 frequencies programmed into each disc that are derived from the molecular structure of many different plant compounds, minerals, phytonutrient compounds, flavonoids, oils and other beneficial earth-derived frequencies.